Study on the Cosmetic Outcome and Safety Evaluation of 3D Printed Biodegradable Biological Mesh for One-Stage Breast Reconstruction After Radical Mastectomy

Study Objectives

* Primary Objective: To evaluate the clinical efficacy and safety of breast reconstruction using a 3D- printed biodegradable biological mesh. * Secondary Objective: To evaluate the postoperative quality of life and breast cancer-free interval after breast reconstruction with a 3D-printed biodegradable biological mesh.

Treatment Plan

* Study Enrollment and Informed Consent: All subjects will sign the relevant informed consent forms before surgery. * Preoperative Assessment: Patients will complete the Chinese version of the BREAST-Q V2.0 scale and the QoL (Quality of Life) scale. * Preoperative Imaging Assessment:

Enrolled patients will undergo a preoperative thin-slice breast MRI (3.0T) using a multi-channel phased-array dedicated breast coil. The patient will be in a prone position, head-first. The operator will assist in placing the breast in the center of the coil, allowing it to hang naturally without compression to maintain its natural shape. The prone position also helps reduce respiratory motion artifacts. The patient's arms will be placed naturally in front of their head, avoiding the scan field to reduce artifacts. A high-pressure injector will be connected to an intravenous catheter. An axial three-dimensional thin- slice scan will be selected to display both breasts simultaneously, showing the radially arranged ducts converging towards the nipple and the glandular tissue in the axillary tail. The 3D thin-slice scan facilitates sagittal and coronal reconstructions. The scan range will cover the superior and inferior borders of both breasts.

Conventional Plain Scan: A SE T1WI sequence will be used to obtain T1-weighted transverse images. Scan parameters: TR 500ms, TE 15ms, slice thickness 2.8mm, FOV for both breasts 360mm, matrix 256x320, NEX 2.

Functional Imaging: A FLASH (Fast Low Angle Shot) sequence will be used for 3D dynamic contrast-enhanced scanning. Scan parameters: TR 4.42ms, TE 1.41ms, flip angle 12 degrees, FOV for both breasts 360mm, matrix 512x384, slice thickness 1.2mm, 6 acquisitions, total time 6 minutes 19 seconds, one acquisition 55 seconds. The contrast agent will be Gd-DTPA at a dose of 0.2 mmol/kg, administered as a bolus injection via an antecubital or dorsal hand vein at a rate of 3 ml/s, followed by a 20 ml saline flush at the same rate. After the first scan, the automatic high-pressure injector will be activated to inject the Gd-DTPA contrast agent and saline. The enhanced scan will be initiated simultaneously with the injection and repeated 5 times. The post-enhancement images will be subtracted from the initial plain scan images to obtain 5 sets of subtracted images. These subtracted images will then be reconstructed using the Maximum Intensity Projection (MIP) method to generate 5 three-dimensional enhanced images.

* Preoperative Implant Size Assessment: The implant volume will be estimated using empirical methods to determine the proposed implant size. * Surgical Simulation, Design, and 3D Printing of PCL Mesh:

Using medical-grade polycaprolactone (PCL) microspheres as the printing material, the optimized breast mesh model will be manufactured using Selective Laser Sintering (SLS) technology. The model data will be processed by slicing software, and the processed data will be input into the SLS printer. The SLS printer will control the laser scanning path according to the contour and filling structure of the current layer to sinter the PCL powder. This process is repeated layer by layer to print the model structure. After printing, the structure is removed, residual powder on the surface is cleaned off, and the final product is sterilized with low-temperature ethylene oxide for 48 hours before use.

* Surgery:Nipple-sparing subcutaneous mastectomy combined with an implant for immediate breastreconstruction will be performed according to standard clinical practice. The choice of incision will be at the surgeon's discretion. Intraoperatively, tissue from behind the nipple will be sent for frozen section histopathological examination. If the margin is positive, the nipple-areolar complex will be resected following safety principles. The 3D-printed biodegradable biological mesh will be used to wrap the silicone implant, which is then placed in the subcutaneous tissue. The wound will be soaked and irrigated with sterile distilled water and normal saline. After achieving thorough hemostasis, a drain will be placed, and the skin will be closed in layers. * Postoperative Management:Electronic health records will be established. Follow-ups will be conducted at 1 week, 1 month, 3 months, 6 months, and 12 months post-surgery, and then every 6 months thereafter. Follow-up content includes recording complications or adverse reactions, completing the Chinese version of the BREAST-Q V2.0 scale for breast aesthetics, satisfaction, and QoL assessment, and monitoring for metastasis or recurrence.

• Recurrence-Free Survival (RFS) [Срок оценки: At 1 week, 1 month, 3 months, 6 months, 12 months ，18 months，and 24 months post-surgery，through study completion, an average of 2 year.]
• Disease-Free Survival (DFS) [Срок оценки: At 1 week, 1 month, 3 months, 6 months, 12 months ，18 months，and 24 months post-surgery，through study completion, an average of 2 year.]
• Overall Survival (OS) [Срок оценки: At 1 week, 1 month, 3 months, 6 months, 12 months ，18 months，and 24 months post-surgery，through study completion, an average of 2 year.]
• Surgical Technical Safety (Complication Rate) [Срок оценки: At 1 week, 1 month, 3 months, 6 months, 12 months ，18 months，and 24 months post-surgery，through study completion, an average of 2 year.]