Analyzing the Effect of Disinfection Additives on the Linear Dimensional Stability of Dental Alginate Impressions: A Quasi-Experimental Comparative Study
Ориентир для пациента и семьи
Простыми словами
Автоматическая сводка по структурированным данным реестра. Она помогает сориентироваться, но не заменяет официальный протокол или оценку врача.
- Что изучают
- В протоколе указаны: Alginate mixed with distilled water, 0.2% Chlorhexidine + Alginate, 1% Chitosan + Alginate, 0.2% Silver Nitrate + Alginate.
- Кому может быть актуально
- Состояния в реестре: Dimensional Changes. Базовые параметры: от 60 Minutes · Все.
- Что важно проверить
- Возраст, диагноз и пол — только базовые ориентиры. Предыдущее лечение, анализы и другие обязательные условия указаны ниже в критериях участия.
- Где проводится
- Список центров уточняется — проверьте первичный протокол.
- Следующий шаг
- Сохраните исследование, покажите его лечащему врачу и уточните актуальный статус у исследовательского центра. Расходы, документы и поездка →
Не всё понятно в терминах? Прочитайте наш гид для пациентов →
Обзор
This quasi-experimental comparative study investigates the effects of incorporating various self-disinfecting agents-0.2% Chlorhexidine (CHX), 1% Chitosan solution, 0.2% Silver Nitrate (AgNO3), green-synthesized Silver Nanoparticles (AgNPs), and 15% PVP-Iodine-on the linear dimensional stability of dental alginate impressions. Alginate is widely used in dentistry but is prone to dimensional changes and contamination. This study aims to assess whether integrating these disinfectants can reduce microbial risks without compromising the material's dimensional accuracy, thereby improving infection control and the precision of dental prostheses
Вмешательства
- Другое Alginate mixed with distilled water
Alginate will be mixed with distilled water only, without any disinfectant additive, to serve as the control for comparison - Другое 0.2% Chlorhexidine + Alginate
Alginate will be mixed with 0.2% Chlorhexidine solution to evaluate its effect on the linear dimensional stability of alginate impressions - Другое 1% Chitosan + Alginate
Alginate will be mixed with 1% Chitosan solution to assess its influence on the linear dimensional stability of alginate impressions - Другое 0.2% Silver Nitrate + Alginate
Alginate will be mixed with 0.2% Silver Nitrate solution to determine its effect on the dimensional stability of alginate impressions - Другое Green-synthesized Silver Nanoparticles + Alginate
Alginate will be mixed with a solution of green-synthesized Silver Nanoparticles to investigate its effect on the dimensional stability of alginate impressions - Другое 15% Povidone-Iodine + Alginate
Alginate will be mixed with 15% Povidone-Iodine solution to analyze its influence on the dimensional stability of alginate impressions
Первичные конечные точки
- Linear Dimensional Stability of Alginate Impressions [Срок оценки: 1 hour after impression making and cast pouring]
Критерии участия
Критерии включения
- Dental stone casts free from excessive porosity, fractures, or other visible defects that could affect dimensional stability measurements.
- Typodont models with intact maxillary arch configurations.
Критерии исключения
- Distorted impressions, under-extended impressions, impressions that detach from the tray before pouring, and impressions with voids, on visual inspection.
- Dental cast with a fracture component, incomplete pouring, and those with voids or bubbles.
Критерии приведены из реестра в оригинале (на английском). Окончательную оценку соответствия проводит исследовательский центр.
Здоровые добровольцы: Нет
Дизайн исследования
- Распределение
- Нерандомизированное
- Модель
- Параллельные группы
- Маскирование
- Простое слепое
- Основная цель
- Фундаментальное исследование
Центры проведения
Список центров уточняется — проверьте первичный протокол.
Идентификаторы
NCT: NCT06899672 · AIDM/ERC/10/2024/01